summerbrush72

Door Handle Replacement Door handles appear to be an insignificant thing but if you aren't happy with the way they look or find them difficult to use then it's time to replace them. With a bit of patience, you can put in an entirely new handle in a short time. Modern door handles are typically equipped with cover plates that conceal the screws to give them an attractive look. If your new handle doesn't have them already attached, you will have to attach them separately. Remove the handle that was previously used The door handle isn't only a decorative addition to your home it also serves as an element of security that allows you to lock and unlock the door. However, as time passes, your door handle may lose its grip, feel loose, or look old and worn out. This is an indication that it's time to replace it. One of the first signs that your door handle needs replacing is if it's becoming difficult to operate. This is a serious issue as you will no longer be capable of locking or unlocking the door and put your family and yourself at risk. It's also an excellent idea to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly if your children or elderly family members struggle to open it, and get trapped inside. Fortunately, it's fairly simple to fix a damaged door handle by replacing the old one. The majority of modern door handles are a standard size and therefore will fit on any door. If you're not sure if the new door handle you are buying will work, take out the old one and take measurements of its holes in the housing. This will help you purchase the right size door handle. It is easiest to take off the old door handle by unscrewing it from the door. This is usually done using the screw driver. Some door handles come with an enclosure plate that hides the screws used to mount them. You will need to remove the cover plate to gain access to the screws. After removing the old handle, take note of the way the spindle is connected. This will assist you in aligning the new handle. Alternatively, you can remove the door handle by removing it from the latch mechanism. This is usually done using the screwdriver, but you'll need to locate the small latch, which should be on the edge of the trim piece. After removing the latch, unscrew the handle and the strike plate. Then, remove the latch from the edge of the door. Take off the Strike Plate You'll need to replace your latch plate when you replace the handle. It's the plate that holds the hole where the door's latch hooks in when the door is closed. The box that the new handles come in will include two options for latch plates – a rectangular one and a circular one (see the diagram above detailing the parts of the door handle). If you have an old rectangular latch plate, swap it with an oval one. This will allow the latch to hook into the strike plate and make the handle easier to use. The first step is to unhook the screw that holds the latch plate. These screws are often tight, and may require some force to loosen. If possible, it may be helpful to have another person assist you with this task. After the screws have been removed, the latch plate should pull out of the door with ease. If it is stuck or doesn't move then use a small nail file to scrape the edges of the latch plate. This will sometimes free the plate. Now, you can proceed to preparing the new door strike plate for installation. Attach the latch plate to the door jamb using the screws that were included with your new handles. Be careful not to over-tighten the screws, as this may damage the strike plate. If you're not sure whether the latch plate is in the correct position Try closing and then opening the door to see whether it latches and closes correctly. If it doesn't then you'll have to adjust the strike plate upwards or down, or forward or back until the door shuts and latches properly. If the door still moves or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more frequent with older doors, but can happen due to wear and tear, hinge mortises that are not deep enough or are not sized correctly for the latch, or because of damaged or broken strike plate that is damaged or broken. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate. Eliminating the Latch The latch is an angled metal piece which slides in and out of a hole in the inside of your door. The latch moves forward when you turn the handle. It also connects to an opening in the frame of the door to keep the door shut. If your door shakes when you close it, changing the latch may be all you need to correct the issue. The screws that support the door latch are hard to spot however, you can use a screwdriver to make a small hole in the trim plate and then pry the latch off. After removing the trim plate, you should be able to take off the latch and the bolts that hold it in place and the spindle in position. If the latch won't be released it is suggested to use an old-fashioned paper clip or tool to free it from the handle mechanism. Place the item in the slot for the latch that is recessed. gently turn or jiggle it until you feel the latch and handle start to split. It is possible repeat this process a few times before you can remove the latch. Once door handles repairmywindowsanddoors is removed it should be possible to move the new latch into the slot without any difficulties. Use your new screws to connect the latch to the strike plate or door frame. Make sure it's correctly positioned in the slot, aligned with the screw chambers. Before installing the new handle, be sure to measure your current backset (the distance from the center of the big hole on the front surface of the door to the edge). Also, make sure whether the size of the latch on the new handle is in line with the measurement of your existing handle. You'll require a new cylinder for your lock if you're replacing the latch and handle or your existing one is damaged. If you're not replacing the locks the new latch should fit in your existing recess, and be compatible with the keys you have currently. Be sure to choose the latch with a rectangular cover plate that match the handles you have. Remove the cover plate You can replace your old door handles with a modern rose and lever designs to improve the look of your house. You can buy complete sets of door handles that come with matching escutcheons and privacy adaptor kits. The first step to replace the door handle inside is to remove the cover plate or rose, which hides the screws and inner mechanism. Use a flathead for removing the plate. It may have an opening on one edge or be held in place by pins. When the cover plate is off, remove the screw that holds the inside handle in place, and then set it aside. Remove the screws that hold both the outer and inner plates. You can loosen them with a Philips Screwdriver. Remove the inner plates and latch from the door. Put them away. Most doors have a gap between the door jamb and the inside edge of the frame, which allows for a handle, however not all have. If yours isn't allow for a handle, you'll have to drill a new hole in the door. This is the same procedure as opening a door locked, but you will have to be extra cautious not to scratch the frame or door. The installation of new door knob screws is necessary after holes have been drilled. Buy the same size as your old screws to avoid getting the handle that is too loose or tight. You'll also need to install a new strike rod and latch plate that aren't part of most door handle sets. Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you're in the market of a top-quality interior door handle replacement set. It's factory-fitted and has received hundreds five-star reviews. It's a great choice for replacing worn out or damaged interior door hardware on your Chevy.